WHMIS in British Columbia: What WorkSafeBC Requires of Employers
SDSs, labels, training and enforcement under the Workers Compensation Act and the OHS Regulation
WHMIS in British Columbia at a glance
- Regulator
- WorkSafeBC, which enforces WHMIS in most BC workplaces. Federally regulated workplaces fall under the federal Labour Program.
- Legislation
- Workers Compensation Act, Part 2, and the Occupational Health and Safety Regulation, Part 5, ss. 5.3 to 5.18.
- SDS update rule
- When a supplier SDS is three years old, obtain an up-to-date one from the supplier, unless the supplier confirms in writing it has not changed (OHS Regulation, s. 5.14).
- Language rule
- The BC Regulation adds no language rule; supplier labels and SDSs are in English and French under federal law.
- Enforcement
- Unannounced inspections, orders, stop-work orders, administrative penalties up to $816,148.69 in 2026, and prosecution (Act, ss. 75, 84, 90, 95 and 102).
In British Columbia, the supplier answers to federal law and the employer answers to WorkSafeBC.
The federal Hazardous Products Act and Hazardous Products Regulations (HPR) cover the import and sale of hazardous products. Supplier labels and SDSs must be in both official languages (HPR, s. 6.2(1)).
Once a product is in a BC workplace, Part 2 of the Workers Compensation Act and Part 5 of the Occupational Health and Safety Regulation, "Chemical Agents and Biological Agents", set what the employer must do. Sections 5.3 to 5.18 are the WHMIS requirements. WorkSafeBC enforces them in most BC workplaces; federally regulated workplaces are covered by Part II of the Canada Labour Code.
Who enforces WHMIS in British Columbia
WorkSafeBC prevention officers may enter and inspect a workplace to check compliance with the Act, the Regulation or an order (Act, s. 75). WorkSafeBC says an officer may call or visit unannounced. During a WHMIS inspection, expect to show the WHMIS program, where SDSs are kept, labels and training records. Officers may also ask workers about the hazards of the products they use, how to protect themselves, what to do in an emergency and where to find more information.
After an inspection, the officer sends an inspection report and cites orders for any violation (s. 84). Orders are legally binding and have a deadline. Where there is a high risk of serious injury, serious illness or death, WorkSafeBC can stop the work (s. 90).
The Act sets two kinds of penalty:
- Administrative penalties imposed by WorkSafeBC on the employer (s. 95). The 2026 maximum is $816,148.69, set by the nature of the violation, the employer’s history and payroll. No penalty applies if the employer shows due diligence (s. 95(3)). In 2025, WorkSafeBC imposed 410 penalties totalling $13.7 million.
- Court fines after prosecution (s. 102): up to $893,241.75 plus $44,662.11 a day for a continuing offence, or 6 months in jail, on a first conviction; up to $1,786,483.47 plus $89,324.18 a day, or 12 months, on a later one.
- Every dollar amount in the Act is adjusted on January 1 each year for inflation (s. 333).
Employer SDS duties
The employer obtains a supplier SDS that meets the HPR for every hazardous product received (OHS Regulation, s. 5.14(1)). A product may not be used or handled without a compliant label, SDS and worker training; it may only be stored while the employer actively seeks the missing information (s. 5.4).
British Columbia sets a three-year rule. When a supplier SDS is three years old, the employer must obtain an up-to-date SDS from the supplier (s. 5.14(2)). The duty is lifted if the supplier confirms in writing that the SDS has not changed or that the update does not apply to the product, or if getting one is not practicable (s. 5.14(3)). Where no update can be obtained, the employer adds any significant new hazard data it knows of to the SDS on file (s. 5.14(4)).
An SDS the employer prepares for a product it makes is updated as soon as practicable after significant new data becomes available (s. 5.15). The employer may present SDS information in its own format if it carries no less content and the supplier SDS is also available at the workplace (s. 5.14(5)).
SDSs must be readily available to exposed workers and to the joint health and safety committee or worker representative, who is consulted on how to make them accessible (s. 5.16). "Readily available" includes an electronic copy accessible to a worker at all times (s. 5.1). WorkSafeBC adds that workers must be trained to use the device, the device must work, and a paper copy is given on request. Reading an SDS to a worker over the phone or radio is not acceptable.
Labels and language
A supplier label stays on every container received and is replaced if it becomes illegible or is removed (OHS Regulation, s. 5.8). The employer updates it as soon as the supplier provides significant new data (s. 5.8(5)).
A workplace label is required on a product the employer makes (s. 5.9) and on a product decanted into another container (s. 5.10). It gives the product identifier, safe handling information and a reference to the SDS. A portable container used only by the worker who filled it, during the same shift, and clearly identified, is exempt (s. 5.10(2)). Pipes, vessels and conveyances are identified by labels, placards, colour coding or another method, backed by training (s. 5.11).
Part 5 sets no English or French rule for workplace labels or SDSs; only laboratory sample labels carry a fixed bilingual statement (s. 5.13). Supplier labels and SDSs must still be in English and French under federal law (HPR, s. 6.2). WorkSafeBC says the wording and languages on a workplace label can be chosen to fit the workplace.
Chemical inventory and emergency planning
Since February 3, 2025, the emergency planning rules in sections 5.97 to 5.104 of the OHS Regulation require a written inventory of each hazardous substance present in a quantity that could endanger someone in an emergency (s. 5.99). For each one it lists the physical state and hazards, the largest container or system capacity, the largest quantity stored or used, the location, and how to reach its health and safety information.
The inventory is part of a written emergency response plan, reviewed at least annually (s. 5.101), and is prepared with the joint committee or worker representative (s. 5.98). Drills run at least once a year, and drill records are kept for five years (s. 5.104). WorkSafeBC says the inventory can be marked on a master WHMIS product list, and it does not expect real-time updates.
Training and worker rights
The employer sets up a WHMIS program with the joint committee or worker representative and reviews it at least once a year (OHS Regulation, s. 5.5). The program includes periodic evaluation of what workers know, through written tests or practical demonstrations. Workers receive general WHMIS education (s. 5.6) and training specific to their workplace and job (s. 5.7).
WorkSafeBC does not approve WHMIS training programs, and it says WHMIS cards and certificates only document attendance. A worker who arrives with a certificate still needs training on the products and procedures at that site.
Workers have the right to know about hazards, to take part in health and safety and to refuse unsafe work. A joint committee is required with 20 or more workers, and a worker representative with 10 to 19.
Multi-site and multi-province employers
A BC employer with sites elsewhere works under more than one rule set. Federally regulated workplaces also expect SDSs that are no more than three years old. Ontario ties updates to significant new data instead, and Quebec requires labels, signs and SDSs in French (LSST, s. 62.4).
The simplest approach is one system built to the strictest rule: one bilingual SDS library, every SDS checked before it turns three, access at all times at every site, and a yearly WHMIS program review on record.
What changed recently
Key dates since 2022.
| Date | Change | Source |
|---|---|---|
| December 15, 2022 | HPR amendments in force (GHS revision 7 and certain provisions of revision 8). Section 5.14 requires supplier SDSs that meet the HPR. | Health Canada |
| February 3, 2025 | New emergency planning rules: written inventory of hazardous substances, risk assessment, written emergency response plan reviewed yearly, annual drills. | OHS Regulation, ss. 5.97 to 5.104; WorkSafeBC |
| December 14, 2025 | End of the federal transition to the amended HPR. | Health Canada |
| January 1, 2026 | Dollar amounts in the Act adjusted for inflation; maximum administrative penalty $816,148.69. | Workers Compensation Act, ss. 95 and 333; WorkSafeBC |
Organizations in British Columbia
School districts in British Columbia, including Delta School District, use CanadaSDS to manage their SDS libraries.
CanadaSDS gives them a bilingual SDS library available 24/7 online, on mobile and by QR code. Our support team verifies SDSs against current supplier versions; we also offer bilingual SDS authoring.
BC organizations using CanadaSDS

Frequently Asked Questions
Short answers, with the sections to check.
When a supplier SDS is three years old, the employer must obtain an up-to-date one from the supplier (OHS Regulation, s. 5.14(2)), unless the supplier confirms in writing that it has not changed or the update does not apply, or getting one is not practicable (s. 5.14(3)).
If no update can be had, the employer adds any significant new hazard data it knows of to the SDS on file (s. 5.14(4)).
Yes. An electronic copy that a worker can reach at all times counts as readily available (OHS Regulation, s. 5.1). WorkSafeBC adds that workers must be trained on the device, the device must work, and a paper copy is given on request. The joint committee or worker representative is consulted on how SDSs are made accessible (s. 5.16).
Since February 3, 2025, employers keep a written inventory of each hazardous substance present in a quantity that could endanger someone in an emergency, as part of their written emergency response plan (OHS Regulation, ss. 5.99 and 5.101). WorkSafeBC says it can be marked on a master WHMIS product list.
The BC Regulation adds no language rule of its own. Supplier labels and SDSs must be in English and French under federal law (HPR, s. 6.2); WorkSafeBC says workplace label wording and languages can be chosen to fit the workplace.
WorkSafeBC prevention officers, in most BC workplaces; the federal Labour Program covers federally regulated ones. WorkSafeBC can impose administrative penalties of up to $816,148.69 in 2026 (Workers Compensation Act, s. 95). On prosecution, a first conviction carries a fine of up to $893,241.75 plus $44,662.11 a day, or up to 6 months in jail (s. 102).
No. WorkSafeBC says WHMIS cards and certificates only document attendance. Workers also need training specific to their workplace (OHS Regulation, s. 5.7), and the employer reviews the WHMIS program at least once a year with the joint committee or worker representative (s. 5.5).
Make the Switch to CanadaSDS
Discover how CanadaSDS helps organizations manage safety, compliance, and risk—using one trusted platform.
